The Marka Racing batteries have a high level voltage under load, with a low internal resistance.
Marka cells are placed in a very hard case very of black color that protects them from shocks.
Marka battery can be connected using gold connectors of 4mm.
These batteries have passed the necessary certifications for air transport.
Specification
Number of cells: 2 (2S+2P)
Type: Shorty
Voltage: 7,4V
Capacity: 4700mAh
C-rate: 100C
Plug: 4mm gold plug
Type: Rectangular
Weight: 210g
Code: MRK-LI4700
The batteries Marka Racing have a high level voltage under load, with a low internal resistance.
Marka cells are placed in a very hard case very of black color that protects them from shocks.
Marka battery can be connected using gold connectors of 4mm.
These batteries have passed the necessary certifications for air transport.
Specification
Number of cells: 2 (2S+2P)
Voltage: 7,4V
Capacity: 6000mAh
C-rate: 100C
Plug: 4mm gold plug
Type: Rectangular
Weight: 285g
Code: MRK-LI6000
The Marka Racing batteries have a high level voltage under load, with a low internal resistance.
Marka cells are placed in a very hard case very of black color that protects them from shocks.
Marka battery can be connected using gold connectors of 4mm.
These batteries have passed the necessary certifications for air transport.
Specification
Number of cells: 2 (2S+2P)
Voltage: 7,4V
Capacity: 7200mAh
C-rate: 100C
Plug: 4mm gold plug
Type: Rectangular
Weight: 310g
Code: MRK-LI7200
In January will be ready the new AMR produced by RC Atomic.
The car is a model touring 2WD in scale 1:27.
The floatable motor cooling fan mount is designed, made and distributed by Marka Racing.
The cooling fan mount made from solid high quality Ergal 7075 aluminium is machined by means of high precision CNC (computer numerical control) machinery.
This fan mount has been thought for radio controlled race cars 1/10th Yokomo BD5/BD7.
Marka Racing fan mount can be installed onto the original hole of Yokomo BD5/BD7 2014 chassis but for Yokomo BD7 2015 it must be used by making a hole into the chassis.
The fixing action to the chassis needs only one screw (avoiding any kind of interference with the chassis’ flexibility).
With this fan mount is possible to raise and lower the fan by means of a screw.
Marka Racing fan mount is compatible with most of fans on the market: 25, 30, 35 and 40 mm.
The bigger fans (35 and 40mm) may be anchored using 2 screws while smaller fans (25 and 30 mm) can be fixed using only one screw (helping the reduction of weight).
This product is extrelmely light (2.3gr) and tough, making it the perfect accessory for an easy and crash-proof job!
Sales package includes: one Ergal 7075 black anodized motor cooling fan mount, one screw for fixing onto the chassis and one screw witch allows you to raise and lower the arm where it is fixed the fan.
Screws for fixing the fan to the mount are not included.
The motor cooling fan mount by Marka Racing is proudly designed, produced and packaged in Italy.
Code: MRK-1031-K
The Axle Drive Cup Adapters are designed, made and distributed by Marka Racing.
Marka Racing Products Axle Drive Cup Adapters are made from high quality 7075-T6 Ergal
and colored anodized.
Developed to be used with Axle Drive Cup Adapters and designed to be used with blades (Yokomo/Aftermarket not included in the package).
They come from with unique design and are over lighter than standard ones. They weights 1.7gr/pc.
Suitable for Yokomo BD5/BD7 in color Black.
2 Pieces included in the package (Pins and blade not included).
The Axle Drive Cup Adapters by Marka Racing is designed, produced and packaged in Italy.
Code: MRK-1041-K
Magic Grip Red Marka Racing don’t have odorless and was developed for asphalt to rubber and foam tire racing.
The high viscosity compound in Magic Grip adheres to the tire for long periods.
Rubber tires
Apply the additive 20-30 minutes before your run and leave on tires.
Wipe off with a towel about 10 minutes before you start.
Foam tires
Apply it 30-40 minutes before you run.
Code: MRK-4001
The motor cooling fan mount is designed in co-operation with the Italian driver Marco Puleo, made and distributed by Marka Racing.
This fan mount is machined from solid high quality Ergal 7075 aluminium by means of high precision CNC machinery.
This mount has been thought for radio controlled race cars 1/10th Xray T4 and T3.
Marka Racing fan mount can be installed both in front of and on the back of the motor using only one screw (avoiding any kind of interference with the chassis’ flexibility).
All of the most commonly used fans fit onto this mount (25, 30, 35 and 40 mm).
Bigger fans (35 and 40mm) may be anchored using 2 screws while smaller fans (25 and 30 mm) can be fixed using only one screw (helping the reduction of weight).
This product is extrelmely light (1.7 gr) and tough, making it the perfect accessory for an easy and crash-proof job!
Sales package includes: 1 Ergal 7075 orange anodized motor cooling fan mount
Screws are not included.
The motor cooling fan mount by “Marka Racing” is proudly designed, produced and packaged in Italy.
Productor: Markaracing
The motor cooling fan mount is designed in co-operation with the Italian driver Marco Puleo, made and distributed by Marka Racing.
This fan mount is machined from solid high quality Ergal 7075 aluminium by means of high precision CNC machinery.
This mount has been thought for radio controlled race cars 1/10th CSO One/V2/V3 and Xray T4 and T3.
Marka Racing fan mount can be installed both in front of and on the rear of the motor using only one screw for the Xray T4 & T3 and two screws for the CSO One/V2/V3 (avoiding any kind of interference with the chassis’ flexibility).
All of the most commonly used fans fit onto this mount (25, 30, 35 and 40 mm).
Bigger fans (35 and 40mm) may be anchored using 2 screws while smaller fans (25 and 30 mm) can be fixed using only one screw (helping the reduction of weight).
This product is extrelmely light (1.7 gr) and tough, making it the perfect accessory for an easy and crash-proof job!
Sales package includes: 1 Ergal 7075 black anodized motor cooling fan mount.
Screws are not included.
The motor cooling fan mount by “Marka Racing” is proudly designed, produced and packaged in Italy.
Productor: Markaracing
The Axle Driveshaft Adapters are designed in co-operation with the Italian driver Marco Puleo, made and distributed by Marka Racing.
Marka Racing Products outdrive are made from high quality 7075-T6 Ergal and colored anodized.
Developed to be used with Axle Driveshaft and designed to be used with blades (not included in the package).
They come from with unique design and are over lighter than standard ones. They weights 1.6 gr/pc.
Suitable for Xray, CSO, Team-C, Team Magic, WRC and Spec-R in color Black.
2 Pieces included in the package (screws and blade not included).
The Axle Driveshaft Adapters by “Marka Racing” is proudly designed, produced and packaged in Italy.
Productor: Markaracing