Gogolap has developed a new micro-receiver is compatible with modules for KO Mini-Z 901SM and 902SM!
Product Features
1. 3CH Support
2. Performance CPU enhance precision control feeling
3. Ultra response mode [KO] support
4. Tiny compact size (15 x 25.5mm)
5. Recommend for any micro chassis car kit
For best performance, digital servo must be required.
Producer: Gogolap
Distributor: Minizracing
Team Minizracing!
Mini-Z Ride Height Setting Disc is the new Atomic product for setup!
Code: AW-010
Source: Atomic
Shop: Minizracing
Team Minizracing!
The X-Power announcement the new Motor Mount for MR-03 & MR-03VE.
Compatible for screw fixed or non-screw fixed motor.
Easy switching between 98 to 102 mm wheel base without need to change the T-plate position (i.e. rolling centre of T-plate remains unchanged).
Improved weight balance design between right and left side of the mount.
Super light weight design without scarifying the strength of the mount.
Motor end bell holder creates a close-ended rectangular design (vs normal’s open-ended C shape one) which helps to improve the strength of the mount.
Code Item: XP-M03-98102
Source: X-Power
Italian Distributore: Minizracing
Team Minizracing!
Minizracing presents the Ceramic Diff. Balls for MiniZ 2WD (MR02/MR03/MR03VE) chosen specifically for drivers who need to have high quality ceramic balls for a perfect differential.
Our ceramic balls are made of solid Silicone Nitride (Si3N4). Please use only ball differential greases.
Specifications
Diameter : 2.381mm or 3/32″
Grade : 5
Material : Silicon Nitride (Si3N4)
Code: MZR3112 (2.381mm/Si3N4 Ceramic Diff. Balls 12 pcs)
Set of 12 ceramic balls.
Worldwide Distributor: Minizracing
Team Minizracing!
LeViteZer magnetic anti-roll suspension system makes your Mini-Z MR-03/MR-03VE levitate trough the track faster than ever.
Magnet controlled front suspension for Kyosho Mini-Z MR-03.
The LeViteZer are designed so you can use it on different manufacturers option front ends, as long as its based on the regular MR-03 suspension with fixed lower arm.
The product consists of the following parts
- Upper arms
- Bottom magnet plate
- Magnets in different size and strength
Code: MR03LVZ001 (LEVITEZER Anti-Roll Front Suspention For Mini-Z)
How does it work?
Basically you have two magnets locate in the stock spring position on the MR-03 in the chassis.
These are mounted on a plate in opposite direction of each other.
Then you have the upper arm, where two magnets are attached on the end.
These two magnets are also in opposite direction of eachother.
The lower magnet are opposite of the one mounted in the chassis.
The force of the magnet in the chassis, will push the magnet on the arm away.
This creates a magnet “cushion” that again acts like a suspension spring.
Since the magnets on the arms are mounted in opposite of eachother, the assembly will also have anti roll bar effect.
When the suspension compresses on one side, the arm goes down, and as soon as the upper magnet on the arm that lowers
are inline with the lower magnet on the other arm, it will start to pull it down.
The setup work is quite easy, but the magnets are strong and can give you some headache under assembly.
Also available are the additional magnets:
code: MR03LVZ002 (LEVITEZER Additional Magnets For Anti-Roll Suspention)
At the following link you can find the instruction manual
Source: LeViteZer
LeViteZer is available at: Minizracing
Video
Team Minizracing!
Minizracing presents the ball bearings for MiniZ 2WD (MR02/MR03/MR03VE)
chosen specifically for drivers who need to have bearings with a high level of precision and glide, with a minimal resistance for maximum speed.
Specifications
- Ring Material: Bearing steel
- ABEC Grade: 3
- Balls: Steel
- Shield Type: 2 metal shields
- Lubrication: Oil
Now they are available in three different packages:
Code: MZR3101 (Mini-Z 2wd High Spedd Ball Bearings Set (7pcs)
Set of 7 ball bearings
- 4 x 2x6x2,5mm
- 3 x 3x6x2,5mm
Code: MZR3102 (Mini-Z High Speed Ball Bearings 2x6x2,5mm)
Set of 4 ball bearings
4 x 2x6x2,5mm
Code: MZR3103 (Mini-Z High Speed Ball Bearings 3x6x2,5mm)
Set of 3 ball bearings
3 x 3x6x2,5mm
Worldwide Distributor: Minizracing
Team Minizracing!
Mon-Tech Racing has recently published a nice video about as to proceed step by step to cut and hole a body for touring.
Thank you a Montech Racing for this video!
Source: Mon-Tech Racing
Team Minizracing!
New knuckle with unique “knuckle lock function” which can reduce majority of play of front suspension so as to improve car handling.
Two small screws were planted into each knuckle to ‘lock’ its position on the king pin (i.e. knuckle lock function). The benefit of which is moving parts of front suspension is reduced from stock set up’s three (knuckle, pin & ball) to currently two (pin & ball only).
The play is reduced further in using 3mm inner diameter bearing (vs stock ones 2mm bearing).
Both of them together are able to substantially reduce play and provide better driving experience.
Note: A hexagon wrench is included.
Code: XP-M03-FSK-V2
Distributor: Minizracing
Sorce: x-powerrc.com
Team Minizracing!
Set of 10 different brass weights fitting perfectly into the slots in the lower body of the Mini-Z MR03 chassis!
Lowering the center of gravity of your Mini-Z racer provides better balance, better stability and higher corner speed!
Article Code: JOM280074 Link Shop
Italian Distributor: www.minizracing.it
Team Minizracing!
