The September 13, 2013 at the circuit of clubs RCZ-Matarò will be held the second race of social Moto GP 2013 strong> with the Mini-Z Motoracer strong>.
Location:
Club RCZ-Matarò
Saint Antoni 82
08301 Matarò
Barcelona
Spain
Source: Club RCZ-Matarò
Team Minizracing!
The three Video finals of European Championship EFRA 1/10 Electric Touring racing in Portugal!
Video by RC Racing TV
Team Minizracing!
Minizracing presents the Ceramic Diff. Balls for MiniZ 2WD (MR02/MR03/MR03VE) chosen specifically for drivers who need to have high quality ceramic balls for a perfect differential.
Our ceramic balls are made of solid Silicone Nitride (Si3N4). Please use only ball differential greases.
Specifications
Diameter : 2.381mm or 3/32″
Grade : 5
Material : Silicon Nitride (Si3N4)
Code: MZR3112 (2.381mm/Si3N4 Ceramic Diff. Balls 12 pcs)
Set of 12 ceramic balls.
Worldwide Distributor: Minizracing
Team Minizracing!
LeViteZer magnetic anti-roll suspension system makes your Mini-Z MR-03/MR-03VE levitate trough the track faster than ever.
Magnet controlled front suspension for Kyosho Mini-Z MR-03.
The LeViteZer are designed so you can use it on different manufacturers option front ends, as long as its based on the regular MR-03 suspension with fixed lower arm.
The product consists of the following parts
- Upper arms
- Bottom magnet plate
- Magnets in different size and strength
Code: MR03LVZ001 (LEVITEZER Anti-Roll Front Suspention For Mini-Z)
How does it work?
Basically you have two magnets locate in the stock spring position on the MR-03 in the chassis.
These are mounted on a plate in opposite direction of each other.
Then you have the upper arm, where two magnets are attached on the end.
These two magnets are also in opposite direction of eachother.
The lower magnet are opposite of the one mounted in the chassis.
The force of the magnet in the chassis, will push the magnet on the arm away.
This creates a magnet “cushion” that again acts like a suspension spring.
Since the magnets on the arms are mounted in opposite of eachother, the assembly will also have anti roll bar effect.
When the suspension compresses on one side, the arm goes down, and as soon as the upper magnet on the arm that lowers
are inline with the lower magnet on the other arm, it will start to pull it down.
The setup work is quite easy, but the magnets are strong and can give you some headache under assembly.
Also available are the additional magnets:
code: MR03LVZ002 (LEVITEZER Additional Magnets For Anti-Roll Suspention)
At the following link you can find the instruction manual
Source: LeViteZer
LeViteZer is available at: Minizracing
Video
Team Minizracing!
Thanks to RC Racing TV you can see the live video of EFRA European Championship 1/10 Electric Touring Car which is held in Torres Novas Portugal.
A good luck to Italian drivers!
Online TV
Finals
Qualifications
Open Ceremony
The results.
Minizracing presents the ball bearings for MiniZ 2WD (MR02/MR03/MR03VE)
chosen specifically for drivers who need to have bearings with a high level of precision and glide, with a minimal resistance for maximum speed.
Specifications
- Ring Material: Bearing steel
- ABEC Grade: 3
- Balls: Steel
- Shield Type: 2 metal shields
- Lubrication: Oil
Now they are available in three different packages:
Code: MZR3101 (Mini-Z 2wd High Spedd Ball Bearings Set (7pcs)
Set of 7 ball bearings
- 4 x 2x6x2,5mm
- 3 x 3x6x2,5mm
Code: MZR3102 (Mini-Z High Speed Ball Bearings 2x6x2,5mm)
Set of 4 ball bearings
4 x 2x6x2,5mm
Code: MZR3103 (Mini-Z High Speed Ball Bearings 3x6x2,5mm)
Set of 3 ball bearings
3 x 3x6x2,5mm
Worldwide Distributor: Minizracing
Team Minizracing!
Mon-Tech Racing has recently published a nice video about as to proceed step by step to cut and hole a body for touring.
Thank you a Montech Racing for this video!
Source: Mon-Tech Racing
Team Minizracing!
The Driver number one is Dario Balestri (Capricorn car) our Minizracing friend!
Good Luck Dario!
Direct video made by RC Racing TV!
Source: RC Racing TV
Team Minizracing!
Incoming the MiniZ M3-03VE edizione 50th.
Technical Data
Length: 124-133mm (4.8 5.2in)
Width: 65-76mm (2.5 2.9in)
Height: 34-35.mm (1.3in)
Chassis Type: MR-03W-RM
Wheelbase: 86-106mm (3.3 4.1in)
Weight: 135g
Motor: BLS 130S
Available in Shop Minizracing!
Here you can find the manual!
Source: Kyosho
Team Minizracing!
New knuckle with unique “knuckle lock function” which can reduce majority of play of front suspension so as to improve car handling.
Two small screws were planted into each knuckle to ‘lock’ its position on the king pin (i.e. knuckle lock function). The benefit of which is moving parts of front suspension is reduced from stock set up’s three (knuckle, pin & ball) to currently two (pin & ball only).
The play is reduced further in using 3mm inner diameter bearing (vs stock ones 2mm bearing).
Both of them together are able to substantially reduce play and provide better driving experience.
Note: A hexagon wrench is included.
Code: XP-M03-FSK-V2
Distributor: Minizracing
Sorce: x-powerrc.com
Team Minizracing!